Replacing the Bag
1
Lift up on the canister lid to open.
2
Discard the used bag.
Note:
This will seal
the bag so dust
and debris cannot
escape.
3
Pull up on the plastic card to remove the
bag from the canister.
4
Install a new bag, sliding the
plastic card into the guide rails.
5
Press down on the lid making sure it is
completely closed.
Note:
To achieve optimal performance with
your robot and automatic dirt disposal,
clean and/or replace your robot's filter as
needed.
Removing Debris from Blower Cover
Inspect blower cover for any lint or debris built-up
and wipe with a clean dry cloth to remove.
Roomba Combo j7+ Owner's Guide
EN
11