Télécharger Imprimer la page

Create FRIDGE RETRO Mode D'emploi page 7

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 34
1. Freezer
2. Internal light
3. Wine shelf
4. Adjustable shelves
5. Hinge
6. Crisper drawer
7. Leveling foot
8. Adjustable thermostat
9. Light switch
10. Door shelves
11. Anti-tip bottle racks
UN PAC KI NG
• This product has been packaged to protect it against transportation damage. Remove all pack-
aging materials from around and inside the appliance, but do not remove any foam insulation
surrounding the pipes at the back. Keep the original packaging and materials in a safe place;
this will help prevent any damage if the product needs to be transported in the future, and you
can use it to store the appliance when it is not in use. In the event that the packaging is to be
disposed of, please recycle all packaging materials where possible.
• Plastic wrapping can constitute a suffocation hazard for pets, babies and young children. En-
sure all packaging materials are out of their reach and disposed of safely.
• Parts: Check to ensure you have all the parts shown at the beginning of this manual.
• Unwind the power cord completely and inspect it for damage. Do not use the appliance if the
refrigerator or its cord have been damaged or if they are not working properly. In case of dam-
age, contact our aftersales service.
• Make sure the refrigerator is disconnected from the power supply before cleaning the interior
surfaces and all internal accessories with lukewarm water, a soft cloth and neutral cleaning
agents. This will remove any dust from transit and storage and will help remove the typical
smell of a brand new product. Dry thoroughly. Important: do not use harsh or abrasive deter-
gents or powders, as these will damage the finish.
PARTS LIST
1
2
3
4
5
6
7
LET'S GET STARTED
8
9
10
11
E NGL ISH
7

Publicité

loading