21. Technical data
Model number
Camera type
Image Sensor
Resolution
Pixels (total)
Pixels (effective)
Lens
Digital zoom
Day/night switch-over
Image compression
Frame rate
Video out
Number of parallel streams
Number of maximum users
Minimum lighting (color)
Electronic shutter
Motion detection
Pre-alarm/post-alarm memory
Image overlay
Alarm inputs (NO/NC)
Digital output
Audio
Backlight compensation
Microphone
White balance
Alert message
Supported browsers
Software supported
SD card
RS-485 port
PTZ protocols
Network connection
Network protocols
Encryption
Access protection
Power supply
Current consumption
Operating temperature
Dimensions (W x H x D)
Certification
22. URL Commands
For some customers who already have their own web site or web control application, the video
server/Network camera can be easily integrated through URL syntax. This section specifies the external
HTTP-based application programming interface. Please refer to Appendix for complete URL command list.
Network camera
1/2.7" CMOS Progressive Scan Sensor
176 x 144 – 1920x1080 (intermediate levels can be freely selected)
1920x1080
1920x1080
CS mount for lens, DC connector
4 x
Mechanically removing IR cut filter
H.264, MPEG-4, MJPEG
H.264
1920x1080@25FPS
MPEG-4 1920x1080@25FPS
MJPEG 1920x1080@25FPS
Yes ,PAL or NTSC
4
10
0,8 Lux
1/5 - 1/40.000 seconds
3 zones
Yes
Date, camera name, private zones
1
1 (12VDC@400mA)
Audio output (Speaker Out), audio input, 2-way audio
Yes
Integrated
Yes
E-mail / FTP / HTTP notification / relay output / NAS drive / SD card
Mozilla Firefox or Internet Explorer 6.x and higher
eytron VMS, ONVIF support
max. 32 GB (SD/SD-HC)
Yes
Pelco D, Pelco P, LiLin, Samsung scc643, DynaDome /
SmartDome
RJ45 Ethernet 10/100 Base-T with PoE
IPv4, IPv6, TCP/IP, HTTP, UPnP, RTSP/RTP/RTCP, IGMP, SMTP,
FTP, DHCP, NTP, DNS, CoS, QoS, SNMP, 802.1X
HTTPS SSLv3
IP address filter, user name, password, 3 authorisation levels
12 VDC, 24 VAC, 802.3af PoE
Max. 5.0 Watt
0 °C ~ 40 °C
76 x 60 x 162 mm
CE, RoHS, C-Tick
110
TVIP52501
English