Heavy Wash
Use this cycle for loads with heavy food soil.
Use both detergent dispenser sections.
Wash
Main
Rinse or
Final
Dry
Approximate
Water
Wash
Purge
Rinse
Time
Usage
(gaUL)
•
•
•
•
•
2 hrs*
6.9-10=8/
Purge
26.1-40.9
Normal Wash
Use this cycle for loads with normal amounts of food soil. (The
energy-usage label is based on this cycle.)
Use covered detergent dispenser section.
Wash
Main
Rinse or
Final
Dry
Approximate
Water
Wash
Purge
Rinse
Time
Usage
(gaUL)
•
•
•
•
1.5 hrs*
4.6=8.5/
Purge
17.4-32.2
China Gentle
Use this cycle for china and crystal. This cycle uses a light
wash and gentle dry. During the heated dry, the heating
element cycles on and off.
Use covered detergent dispenser section.
Wash
Main
Rinse or
Final
Dry
Approximate
Water
Wash
Purge
Rinse
Time
Usage
(gaUL)
•
•
•
•
1.5 hrs*
4.8-8.6/
Purge
cycled
18.2-32.6
Quick Rinse
Use this rinse cycle for rinsing dishes, glasses, and silverware
that will not be washed right away.
Do not use detergent with this cycle.
Wash
Main
Rinse
Final
Dry
Time
Water
Wash
Rinse
(min)
Usage
(gal/L)
•
•
10_14
2.2_4=3/
8.3-16.3
*if the incoming water temperature is less than the recommended
temperature or food soils are heavy, the cycle will automatically
compensate
by adding time and heat as needed.
1. Press CANCEL!DRAIN, The Cancel/Drain
light glows.
2. The dishwasher starts a 2-minute drain (if needed), Let the
dishwasher
drain completely. The light turns off after
2 minutes. The door must be closed for the dishwasher to
drain.
To stop the drain
You can press CANCEL/DRAIN
again to stop the drain.
Remember to drain the dishwasher
before starting a new cycle.
To clear the indicators
Press CANCEL/DRAIN
before starting the dishwasher to clear all
options and cycles.
s ©yce
S ct4£sg
During the first minute of a cycle
1. Select a new cycle and/or options.
2. Check the detergent dispensers. They must be filled properly
for the new cycle.
3. The Start/Resume
light will flash when the door is opened.
Make sure the door is closed.
4.
Press START/RESUME.
After the first minute of a cycle
1. Press CANCEL/DRAIN. The Cancel/Drain
light glows. Your
dishwasher
starts a 2-minute drain (if needed). Let the
dishwasher
drain completely.
2. Check the detergent dispensers. They must be filled properly
for the new cycle.
3.
Make sure the door is closed.
4. Select a new cycle and/or options.
5.
Press START/RESUME.
You can add an item anytime before the main wash starts. Open
the door and check the detergent dispenser. If the cover is still
closed, you can add items.
To add items
1. Carefully open the door slightly to stop the cycle. Wait for the
spraying action to stop before opening the door. The Start/
Resume light will flash.
2. Open the door. If the detergent dispenser cover is still closed,
add the item.
3. Close the door firmly until it latches.
4.
Press START/RESUME.
IMPORTANT: If Lock On is selected, turn off the lock (see Lock
On section in "Option Selections"), or the Start/Resume
light will
continue to flash.
12