Publicité
Les langues disponibles
Les langues disponibles
This section
explains
how to record from the tuner, CD player, or
Preparation
Set the tape to the point where
recording
will start.
Use Type I (normal)
tape only.
Note that recording
will be done on one side of the tape only.
7 Insert the tape to be recorded on into Deck 2.
Insert the tape with the side to be recorded
on first facing out
from the unit.
2
3
A
Press one of the function
buttons
and prepare
the source to be recorded.
To record from a CD,
press CD and load the disc(s).
To record from a radio broadcast, press TUNER and tune
in to a station.
To record from the connected source, press PHONO or
VIDEO/AUX and play.
Press
REC/REC
MUTE to start recording.
To stop recording, press
.
To pause recording, press 11. (Applicable
when the recording
source
is TUNER,
PHONO
or Vi DEO/AUX.
)
To resume
recording,
press again.
To start recording with the remote control
First press @/OREC/REC
MUTE, and then press +F
within 2
seconds.
The output
volume
and tone of the speakers
or headphones
may be freely varied without
affecting
the recording.
4-second
blank spaces can be inserted at the desired point during
recording.
(Applicable
when the source is TUNER,
PHONO
or
VIDEO/AUX.)
1
Press
REC[REC MUTE during recording or while in
recording pause mode.
~
on the display
flashes
for 4 seconds
and a 4-second
blank space
is made.
Then,
the deck enters
the recording
pause mode.
2
Press II to resume recording.
To insert a blank space of less than 4 seconds,
press
REC/
REC MUTE
again while ~
is flashing.
To insert blank spaces of more than 4 seconds, after
the
deck enters
recording
pause
mode,
press
REC/REC
MUTE
again.
Each time the button is pressed,
a 4-second
blank space
is added.
When
the selected
function
is CD, playback
and recording
start simultaneously.
To erase a recording
Make sure the microphone
is not connected
to the unit.
Set the microphone
volume
to OFF (page 20).
1
Insert the tape to be erased
into Deck 2 and press TAPE/
DECK
1/2 to display
'(TP 2.
2
Set the tape to the point where the erasure
is to be started.
3
Press
REC/REC MUTE to start the erasure.
16
ENGLISH
Publicité
