Skil PWRCORE 12 SR6608A-00 Guide D'utilisation page 12

Attaching Sandpaper
Your sander uses hook-and-loop backed
sandpaper, which firmly grips to the backing
pad when applied with moderate pressure.
To change sandpaper, peel off the old sheet,
remove any dust from the backing pad, and
press the new sandpaper in place. Be sure to
align the holes in sandpaper with the holes in
the backing pad to allow the dust extraction
system to function properly (Fig. 4).
Turning the Sander On/Off
To turn on the sander, depress the side of the
On/Off switch marked "I". To turn it off, depress
the side of the On/Off switch marked "O"
(Fig. 5).
12
Fig. 4
Fig. 5