Orbegozo CPW 04132 Manuel D'instructions page 18

CPW 04132
REMOTE CONTROLLER OPERATION:
Point the remote at the infrared sensor to power the fan.
MAINTENANCE
How to replace a led light
Please contact with you technical service.
CLEANING
Clean with a soft, dry cloth. Never use scouring pads, abrasive or chemical cleaners. Do
not
allow condensation to come in contact with the electrical components.
All manuals and user guides at all-guides.com
HIGH: Drives the fan at high speed.
MEDIUM (med): activates the fan at medium speed.
LOW (low): activates the fan at low speed.
STOP (off): turns off the fan.
LIGHT: on/off: Turns the fan light on or off.
1H, 2H, 4H: programs the operation of the fan (but not the light)
for 1 hour, 2 hours and 4 hours respectively. To do this, start the
fan and press one of these 3 buttons, and after the selected
time the fan will stop working (note: the light cannot be
programmed)
:Long press to activate Wi-Fi.
Battery: 2 x AAA 1.5V
18