Télécharger Imprimer la page

Klarstein JET SET 4000 Mode D'emploi page 24

Publicité

Les langues disponibles
  • FR

Les langues disponibles

EN
24
Insert filter
When you have cleaned the filters, replace them in reverse order. Make sure that the
filters are firmly seated.
Clean air inlet filter
Clean the air inlet filter once a month. Remove the filter by holding the lower and
upper ends of the frame and pulling it out. Clean the inlet filter with a soft brush. Then
replace the filter in the frame and secure the frame.
Cleaning of the inner and outer surface
• Do not clean the device with running water.
• Do not use solvents, thinners or alcohol for cleaning.
• Clean the drum only with a damp cloth, do not use spray cleaners. Clean the drum
before each use.
• Do not use scouring agents or abrasive sponges for cleaning, they will damage the
surface of the unit.
Filter frame
Inlet filter

Publicité

loading