ADE M118600 Mode D'emploi page 31

8.4.3 Error messages
Error message
[Lo]
[uLoad]
[oLoad]
[no 0.00]
„-----"
„-----"
8.5 Maintenance
To ensure correct measurement, maintenance and repair should only be carried out
by authorised personnel.
To prevent the intended level of accuracy the product must be set up carefully and services
regularly. We recommend having it serviced every 3 to 5 years depending on how often the scales
are used.
8.6 Storage and Transport Conditions
Keep all original packaging materials and components for eventual return of the scale to avoid
damage during transport; these are not covered by the warranty.
To avoid damage disconnect all cables before transport.
8.7 Accessories
Item
Power adapter
Carrying bag
M118600+M118600-01-210305-Rev002-UM-en
Description
Empty battery.
Underload (-20d)
Overload (-9d)
No zero point available.
Negative weight values (e.g. in
the tare function) are not
displayed.
Scale is loaded too slowly
during the HOLD function.
Item description
UES06WOCP-060100SPA
MZ10060
Troubleshooting
Insert new batteries.
Use the scale in mains
operation.
Switch the scale off and on
again.
Unload the scale. Zero range or
weighing capacity exceeded
Zero the scale.
Load the scale.
Unload the scale. Wait until
>0< is shown in the display.
Load the scale again.
Item number
H2870-006
MZ10060
Seite 31 von 112