V-ZUG WineCooler UCSL Notice D'installation page 32

12. Screw on the hinge at the top left.
12.
13.
14.
14. Remove spacer.
Turn spacer through 180° and
re-fit on the opposite side.
EN-08
Tighten screws.
13. Screw on the hinge at the
bottom left.
Tighten screws.
15.
15. Close door and check that it
is aligned with the side walls
of the appliance.
Adjusting the lateral tilt of the door
If the door is at an angle, adjust the angle.
16.
16. Undo the screws.
Align the door at the side.
Tighten screws.