Publicité
Les langues disponibles
Les langues disponibles
Supplied accessories
The seal must be cleaned with soapy water every time before
commissioning.
Dust filter
Foam moulding for ventila-
tion duct in appliance plinth
Accompanying documents
Retaining screws for installation
Spanner to adjust the height of the appliance
EN-02
Ventilation grille
Cover strips
Mounting the dust filter
The supplied dust filter prevents that dirt enters
the motor compartment, reducing the refrigeration
performance. Therefore always install the dust filter.
Remove the protective film from the
dust filter.
Insert the filter at the bottom and click
into place at the top.
Appliance venting
The required air flow is directed through the plinth.
It is important to use the provided ventilation grille for the ventila-
tion opening.
Cut-out section in the plinth panel
Important
The cut-out section in the plinth
panel must be centred in rela-
tion to the appliance.
Publicité
