V-ZUG WineCooler UCSL Notice D'installation page 29

5.
Important
If the foam moulding is not installed, the appliance will not
achieve its full refrigeration performance during operation.
5.
Screw the appliance to the body
of the unit at the bottom on the
left and right.
6.
Insert the foam moulding into the
opening in the appliance plinth
as indicated.
6.
7.
Insert the ventilation grille in the plinth panel.
8.
Fit the plinth panel.
Important
The foam moulding must be touching the ventilation grille.
EN
7.
8.
EN-05