Vermeiren LiNX 400 Manuel D'utilisation page 17

4.9 Changing drive function
The wheelchair's speed functions can be operated from the D1, D2, or D3 submenu. These
submenus allow the user to select the maximum speed limit of the wheelchair (that is the speed
when the joystick is fully deflected) to their preference and environment.
The maximum driving speed by maximal deflection of the joystick depends on the selected drive
submenu (D1, D2 or D3) and the manual speed setting in this submenu.
Low speed setting
(indoor driving)
Submenu D1, D2, D3
In each drive submenu, the speed can be changed in 10 discrete steps between lowest and
highest speed. The available speed range for joystick operation is displayed in green. The yellow
part is the remaining speed range, not in use.
The speed range can be changed by sliding the arrow key (S):
• UP, to increase speed range (more green)
• DOWN, to decrease speed range (more yellow)
D1
Low speed range
Adjusting speed range
Medium speed setting
(indoor-outdoor driving)
D1
S
Medium speed range
13
Operating console functions
High speed setting
(outdoor driving)
D1
T
Full speed range
EN
LiNX 400
2021-09
NL