Publicité
Les langues disponibles
Les langues disponibles
4.2
Failures and blocks
When the operating console is powered and a failure
appears, the indicator of the ON/OFF button starts blinking
in red, see picture. The number of blinks indicates the fault
code. For a few seconds, a triangle with fault code (A) is
displayed. The ON/OFF button will keep blinking.
In case of a failure, one or all functions of the operating
console are blocked. This is indicated by the "forbidden"-
symbol and the yellow warning bars (B).
The status is indicated by a small symbol (C) in the top corner of each screen.
For more information, see §5.
4.3
Battery status and charging
WARNING
Follow the charging instructions in the wheelchair instruction manual and the suppliers' manual
of the battery charger.
The battery charge indicator (located at the top of the touchscreen) provides
an estimation of the remaining battery capacity.
In the following table all battery indications and their meanings are collected.
Table 1: Battery status description
Display
Failure indication and drive inhibited
Risk of injuries and damage
Description
Most blocks are green
Blocks turn yellow
Blocks turn red
Yellow or green blocks
with charging symbol
A
Battery status indication
Meaning
Battery capacity: more
than 50% of full
capacity.
Battery capacity level
is decreasing: less
than 50% of full
capacity
Battery almost empty
Battery is charging.
Battery capacity level is
indicated by colour.
7
LiNX 400
2021-09
Operating console functions
C
B
Remarks
Consider recharging
the battery soon.
Stop and recharge
now.
Wait until battery is
completely charged.
EN
NL
Publicité
