Vermeiren LiNX 400 Manuel D'utilisation page 15

4.5.5 Odometer
The menu screen shows the speed indication as well as an indication of the travelled trip distance
(N).
To reset the trip distance back to zero:
• Enter the setting menu by tapping the settings button (K).
• Tap on the submenu "Odometer".
• To reset the trip distance (P) to zero, tap the button (R).
• The total traveled distance (O) cannot be reset.
• To switch between distance indication in kilometers or miles, tap (Q).
N
Joystick movements
4.6 Joystick operation (driving and braking)
Operating the joystick in a specific direction will move the electric wheelchair
in that direction. The speed of movement depends on the displacement of the
joystick. If the joystick is pushed/pulled to maximum displacement, the speed
will be maximal (within the selected drive mode).
By moving the joystick to its central position (neutral) during driving, the
brakes will start working until the wheelchair stops:
• For gradual braking, move the joystick slowly
• For a quick stop, release the joystick; the wheelchair will stop as
quickly as possible.
Make sure that the joystick is in neutral (central) position when pressing the on/off button,
otherwise the electronics will be locked.
After switching the operating console ON by the ON/OFF button, the joystick stays in the
central position for at least five seconds. The console has been programmed this way for
technical and safety reasons. If joystick and ON/OFF button are activated at the same time,
the steering unit is locked and will only unlock after switching completely OFF.
Make sure that the free-wheel lever is in braking position BEFORE switching the wheelchair
ON. Electromagnetic brakes do NOT function if the wheelchair is in free-wheel mode. This
is indicated on the operating console. Driving is not possible.
To prevent unintended changes of the settings, the operating keys disappear during
operation of the joystick. As soon as the joystick is in neutral position, the keys appear again.
Joystick movements
11
LiNX 400
2021-09
Operating console functions
O
P
R
Q
EN
NL