Vermeiren LiNX 400 Manuel D'utilisation page 13

Settings button and pop-up screen
• To navigate to one of the items in the pop-up screen, tap on the item.
• To navigate to the previous screen, tap the return arrow.
• To close the pop-up screen, tap on the cross key (M) at the bottom of the screen.
• When a selection key is active, the indicator of the key turns green.
4.5.1 Time setting
• Tap on the time indication (H in previous figure) and set hour and
minutes by tapping the arrows (I).
• To switch from 12-hour dial to 24-hour dial, tap in the area of the
12/24-hour button (J).
4.5.2 Screen lock
The Screen lock key (L) (see Figure 6) is primarily intended to restrict the authorisation of the
screen operation to the occupant, but also prevents unintentional use of screen controls.
The screen lock does not influence the driving functions or body-positioning functions. When
the screen is locked, the maximum drive speed is set according to submenu D1.This pop-
up screen can also be opened/closed by pressing submenu button II (3) for 2 seconds.
• To lock the
screen:
Tap and hold your finger on the settings button (K) for 7 seconds (see Figure 6).
o
To switch the lock ON, tap the selection key of the "screen lock" section. The indicator
o
turns green.
When the screen is locked, all operating keys are greyed out and become inoperable.
The symbol of the settings button (K) turns into a padlock.
• To unlock the screen:
Switch off the operating console with the ON/OFF button to lift
o
the lock.
The keys on the screen become operable again.
D1
2
K
9
Operating console functions
H
L
M
Time setting
D1
Screen locked
EN
LiNX 400
2021-09
NL
I
J
K