Publicité
Les langues disponibles
Les langues disponibles
EN
NL
4.3.1 Charging
• Driving is prevented (inhibited) while the system is being charged.
• Charging is possible without switching the operating console ON. To see the battery
status indicator, switch it ON.
Plug the battery charger into the remote's XLR socket (9), see Figure 1.
The battery status indication now turns into a charge indication, see figure
5. The battery charging state is shown by the yellow or green blocks.
After a few seconds, the operating console turns to power-save mode and
the screen illumination decreases. Tapping on the screen turns normal
illumination on.
4.4
Navigation
There are 2 main menus to view on the touchscreen:
• S-menu for adjusting the body position, see §4.8.
• D-menu for changing the drive functions, see §4.9.
Each main menu has separate submenus.
Once the operating console has been switched ON, you can navigate through the screens/menu
in two ways:
1. by pressing navigations buttons (see Figure 1, 2+3).
o Press navigation button I (2) shortly, to select a main menu (S, D...)
o Press navigation button II (3) shortly, to select a submenu (S1, S2...)
2. by swiping with your finger on the touch screen
o Swipe up/down to select a main menu (S, D...) and tap to view it.
o Swipe left/right to select a submenu (S1, S2...) and tap to view it.
Use the set key to get an overview on the navigation structure.
4.5
Settings button
The settings button (K) is displayed in each menu screen. With this button, the screen view can
be changed, a popup screen can be opened, and settings can be changed.
• To toggle between full screen view and menu-scroll view, tap the settings button shortly.
• To open the pop-up screen, hold your finger on the settings button for 4 seconds.
This pop-up screen can also be opened/closed by pressing menu button I (2) for 4 seconds.
Battery-charging indication
8
LiNX 400
2021-09
Operating console functions
Publicité
