HIKOKI CH 3672DA Mode D'emploi page 9

Battery
Lights ;
The battery remaining power is over 75%
Lights ;
The battery remaining power is 50% – 75%.
Lights ;
The battery remaining power is 25% – 50%.
Lights ;
The battery remaining power is less than 25%
Blinks ;
The battery remaining power is nearly empty.
Recharge the battery soonest possible.
Blinks ;
Output suspended due to high temperature.
Remove the battery from the tool and allow it to
fully cool down.
Blinks ;
Output suspended due to failure or malfunction.
The problem may be the battery so please
contact your dealer.
SPECIFICATIONS
1. Power tool
Model
Voltage
No-load speed
Blade size (Trimming width)
Battery available for this tool*
Weight**
Continuous operating time (depending
on the work conditions)
* Existing batteries (BSL3660/3620/3626, BSL18xx series, etc.) cannot be used with this tool.
** According to EPTA-Procedure 01/2014
2. Battery
Model
Voltage 36 V / 18 V (Automatic Switching*)
Battery capacity
Available cordless
Multi volt series, 18V product
products**
Sliding charger for lithium ion
Available charger
* The tool itself will automatically switch over.
** Please see our general catalogue for details.
4.1 kg (With BSL36A18 attached)
4.4 kg (With BSL36B18 attached)
Approx. 62.5 minutes
BSL36A18
2.5 Ah / 5.0 Ah
(Automatic Switching*)
batteries
STANDARD ACCESSORIES
In addition to the main unit, the package contains the
accessories listed on page 237.
Standard accessories are subject to change without notice.
APPLICATIONS
○ Fine trimming hedges
○ Trimming and pruning garden trees
CH3656DA
36 V
1000 – 1500 min
560 mm
Multi volt battery
3. Charger
Model
Charging voltage
Weight
NOTE
Due to HiKOKI's continuing program of research and
development, the specifi cations herein are subject to
change without prior notice.
9
English
CH3672DA
-1
720 mm
4.4 kg (With BSL36A18 attached)
4.6 kg (With BSL36B18 attached)
Approx. 48 minutes
UC18YSL3
14.4 V – 18 V
0.6 kg