Publicité
Les langues disponibles
Les langues disponibles
b) Do not use the power tool if the switch does not turn it on and off. Any power
tool that cannot be controlled with the switch is dangerous and must be repaired.
c) Disconnect
the plug from the power source and/or the battery pack from the
power tool before making any adjustments,
changing
accessories,
or storing
power tools. Such preventive safety measures reduce the risk of starting the power
tool accidentally.
d) Store idle power tools out of the reach of children and do not allow persons
unfamiliar with the power tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained users.
e) Maintain power tools. Check for misalignment or binding
of moving parts,
breakage of parts and any other condition that may affect the power tool's
operation. If damaged, have the power tool repaired before use. Many accidents
are caused by poorly maintained power tools.
f) Keep cutting
tools sharp and clean. Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are easier to control
g) Use the power tool, accessories
and tool bits etc., in accordance
with these
instructions,
taking into account the working
conditions
and the work to be
performed.
Use of the power tool for operations different from those intended could
result in a hazardous situation.
5) Battery tool use and care
a) Recharge only with the charger specified by the manufacturer. A charger that is
suitable for one type of battery pack may create a risk of fire when used with another
battery pack.
b) Use power tools only with specifically
designated
battery packs. Use of any
other battery packs may create a risk of injury and fire.
c) When battery pack is not in use, keep it away from other metal objects like
paper clips, coins, keys, nails, screws, or other small metal objects
that can
make a connection
from one terminal
to another. Shorting the battery terminals
together may cause bums or a fire.
d) Under abusive conditions,
liquid may be ejected from the battery, avoid
contact. If contact accidentally
occurs, flush with water. If liquid contacts
eyes,
additionally
seek medical
help. Liquid ejected from the battery may cause irritation
or bums.
6) Service
a) Have your power tool serviced by a qualified repair person using only identical
replacement
parts. This will ensure that the safety of the power tool is maintained.
SPECIFIC
SAFETY RULES
• Wear ear protectors
with impact drills. Exposure to noise can cause hearing toss.
• Use auxiliary
handles supplied with the tool. Loss of control can cause personal injury.
• Hold power tools by insulated
gripping
surfaces when performing
an operation
where the cutting tool may contact hidden wiring or its own cord. Contact with a
"live" wire will make exposed metal parts of the toot "live" and shock the operator.
• When working
on a ladder or on scaffolding
be sure to lay the tool down on its side
when not in use. Some tools with large battery packs wilt stand upright but may be easily
knocked over.
• Use clamps or another practical
way to secure and support the work piece to a
stable platform.
Holding the work by hand or against your body leaves it unstable and
may lead to loss of control.
• Keep your hair, clothing,
and gloves away from air vents. Air vents often cover
moving parts in which these items can be caught.
• Hold tool firmly with two hands.
Use auxiliary handle if provided.
If auxiliary handle
not provided, grip toot at bottom of battery. Loss of control can cause personal injury.
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and
other construction
activities
contains
chemicals
known to the State of California
to cause cancer, birth defects or other reproductive
harm. Some examples
of
these chemicals
are:
• lead from lead-based paints,
• crystalline silica from bricks and cement and other masonry products, and
• arsenic and chromium from chemically-treated
lumber.
Publicité
