Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Useful Function
Siri Eyes Free allows you to use an iPhone
handsfree by simply speaking into the microphone.
This function requires you to connect an iPhone to
the unit with BLUETOOTH Auto Paring. Availability is
limited iPhone 4s or later. Make sure that your
iPhone is running the latest iOS version.
You must complete BLUETOOTH registration and
connection configurations for the iPhone with the
unit in advance. For details, see "Preparing a
BLUETOOTH Device" (page 7).
Using Siri Eyes Free
Make sure that [HOME Key Function] is set to [Voice]
(page 18).
1
Activate the Siri function on the iPhone.
For details, refer to the operating instructions
supplied with the iPhone.
2
Press and hold HOME.
The voice command display appears.
3
Speak into the microphone after the
beep.
The iPhone beeps again and Siri Eyes Free is
activated.
To deactivate Siri Eyes Free
Touch [Close].
Notes
The iPhone may not recognize your voice depending
on usage conditions. (For example, if you are in a
moving car.)
Siri may not function properly, or the response time
may lag in locations where iPhone signals are difficult
to receive.
Depending on the iPhone's operating condition, Siri
may not function properly, or may quit.
If you play back a track with an iPhone using the
BLUETOOTH audio connection, when the track starts
playback via BLUETOOTH, the Siri function
automatically quits and the unit switches to the
BLUETOOTH audio source.
When Siri is activated during audio playback, the unit
may switch to the BLUETOOTH audio source even if
you do not specify a track to play back.
When connecting the iPhone to the USB port, Siri may
not function properly, or may quit.
When connecting the iPhone to the unit, do not
activate Siri with the iPhone. Siri may not function
properly, or may quit.
There is no audio sound while Siri Eyes Free is
activated.
Handsfree Calling
Before handsfree calling, make sure that
are in the display. If the indications do not appear,
perform the BLUETOOTH connection procedure
(page 7).
Receiving a Call
1
Touch
when a call is received.
The phone call starts.
Note
The ringtone and talker's voice are output only from the
front speakers.
To adjust the ringtone volume
The level of ringtone volume will be stored into
memory, independently from the regular volume
level.
Rotate the volume control dial while receiving a call.
To reject/end a call
Touch
.
Making a Call
1
Press HOME, then touch [Phone].
2
Touch one of the icons on the
BLUETOOTH phone display.
(call history)*
Select a contact from the call history list.
The unit stores the last 20 calls.
and
1
15
GB
Publicité
Chapitres
Table des Matières
Dépannage
