HSM SECURIO B 35S Notice D'utilisation page 15

5 Operation
WARNING
Before switching the machine on,
make sure that you observe all
safety instructions.
Switching on the shredder
• Set mains switch at rear of paper shred-
der to „I".
• Press the operation button.
 The "Ready for operation" indicator lights
up.
Shredding paper
• Feed the paper to the middle of the paper
slot. The light barrier starts the cutting
unit automatically. Therefore, with thin
paper strips, make sure the light barrier
detects them.
 Three seconds after the light barrier in
the paper feed opening is free again, the
cutting unit is switched off automatically
and the shredder switches to standby.
14
Note:
You can fold the safety
element upwards to
shred larger quantities
of paper. This makes
it easier to access the
feed opening.
SECURIO B 35
english
Shredding CDs
(only in cut size: 3.9 mm, 5.8 mm, 4.5x30 mm)
Shredding credit cards
Feed the cards through the CD slot
when the cut size is 3.9 mm, 5.8 mm and
4.5x30 mm. For machines with a cutting
width of 1.9x15 mm, use the paper feed.
Switching off the shredder
• Press the operation button.
 The "Ready for operation" indicator goes
out.
• Set mains switch at rear of paper shred-
der to „0".
• Only feed the material
into the insertion slot
of the safety element
(splinter protection).
Note:
To completely separate
the materials shredded,
you can insert the CD
bag supplied.
12/2012