Quick Start Guide TG 1000 – Software
14
5.
Chameleon Software
Each TG 1000 receiver is provided with an integrated web server with an own web page. In order to
configure and monitor your TG 1000 receivers you need not install any software. You only need a
network connection and an network-compatible device (client) with web browser. Therefore, you can
control your TG 1000 system with a PC, Mac, tablet PC or smartphone.
For a smooth operation of the Chameleon software your TG 1000 receivers must correctly be connected
to a network. Then they can be operated in the manual or DHCP mode (default). With the manual
mode you must manually assign each connected receiver a different IP address in the sub menu
"Functions -> Network". With the DHCP mode the IP address is assigned by the so-called DHCP server,
which is integrated in each standard router. If the DHCP mode is not used, a usual Ethernet switch
will do for networking. In this case the receivers must be operated in the manual mode. In this network,
without a DHCP server the client device also must receive a static IP address.
In order to use the Chameleon software with the client device, it can be linked to any TG 1000
receiver. For this you have to enter the IP address of the receiver in your web browser
(e.g. "192.168.1.101"). The IP address of the receiver can be found in the sub menu
"Functions -> Network". You can connect to any receiver. After a successful transmission of the web
page the basic screen of the Chameleon software is displayed in the browser window. An overall view
of all receivers in a virtual rack is displayed. The sequence of the displayed receivers is determined
by the device ID, which can be selected in the sub menu "Functions -> Network" of the receiver. In
order to ensure a clear assignment, you must assign each receiver a different device ID.
You will find an extensive description of the different functions of the "Chameleon" software in the
"TG 1000 - Digital Wireless System" manual on the internet at www. beyerdynamic.com/tg1000