Tripp-Lite PDU330AT6L15 Manuel Du Propriétaire page 4

2. Installation
2.2 Mounting the Power Strip
Note: Mounting buttons come pre-installed to the
Power Strip for toolless mounting. A second set of
button mounting holes on the power strip allow
alternate positioning in the rack.
Position the Power Strip as desired within the
rack enclosure, align the buttons with the rack
mounting slots and slide the Power Strip
downward into position.
2.3 Connecting the Power Strip to the ATS
The power strip has a 7 conductor cord with an
8-position plug. The plug installs directly to the
ATS mating receptacle on the back of the unit.
21-03-404-933363.indb 4 21-03-404-933363.indb 4
Your model may differ slightly from image.
Your model may differ slightly from image.
4
4/1/2021 1:09:31 PM 4/1/2021 1:09:31 PM