Crosscall Core X5 Mode D'emploi page 77

Step 2: Connecting X-SAFE and the programmable button
By default, the X-SAFE app is linked to programmable button no. 2 (bottom right of the
phone) and the triple tap to trigger it.
But you can also choose to link the app to your other programmable button (no. 1, at the
top left of your phone) as well as change the activation mode:
• the triple tap
• the long press
If you want to change the default setting for this app:
1. Go to Settings
> Buttons
.
2. Choose the button to which you want to link this app (1 or 2) as well as the means of
triggering it, and click on it.
3. Then click on the settings icon next to the app field, and choose X-SAFE.
Step 3: Issuing an alert
3x
or long
press
77