F.
With the wall mounting bracket installed, have two people lift the appliance up and insert the hooks on the
bracket into the slots on the back of the appliance (Fig. 3-3).
G.
Check the appliance for stability, ensuring the bracket will not pull free from the wall.
H.
Remove the white screw from the bottom of the appliance (Fig. 3-4).
I.
Secure the bottom bracket to the appliance using the white screw previously removed in step H, then
secure the bottom bracket to the wall using the screw supplied (Fig. 3-5).
J.
If desired, install the side cover panels to hide sides of the appliance (Fig. 3-6).
K.
Install media (see "crystal ember installation" section).
L.
Reinstall front glass (see "front glass removal / installation" section).
Wall
Fig. 3-4
C x 8
For illustrative purposes
only. Installation may vary
by model size.
Fig. 3-3
i
ii
A x 1
Repeat on
opposite side.
Side Cover
Panel
Fig. 3-6
installation
EN
Fig. 3-5
15
W415-4155 / - / 05.10.23