Garland SCAR 501 E Manuel D'instructions page 30

English
9. TROUBLESHOOTING
Depending on the symptons of the machine, we can detect the probable cause of the problem and solve the
problem:
PROBLEM
The engine does not work
Abnormal noises
Abnormal vibrations
In case of not solving the problem, take the machine to your nearest service dealer.
To locate your nearest after sales dealer, contact the shop where you bought the machine from.
CAUSE
The machine is not switched to the
mains
Damaged cable
Switch in a bad state
Worn out brushes
Overload protection activated
Strange object ob the blades
Internal problem of the engine or
transmission
30/100
ACTION
Switch the machine to the mains
Take your machine to the after sales
dealer
Never repair the cable with tape
Take your machine to the after sales
dealer
Take your machine to the after sales
dealer
Allow to cool for 15 minutes
This machine has a system for current
overload that will activate itself in the
following situations:
a) Excess material on the working
cylinder.
b) The grass being scarified is too tall.
c) Excess resistance when scarifying.
Take your machine to the after sales
dealer