Télécharger Imprimer la page

Broan BCDA Serie Instructions D'installation page 5

Publicité

Les langues disponibles

Les langues disponibles

Operation
Always turn your hood on before you begin cooking to establish an air flow in the kitchen.
Let the blower run for a few minutes to clear the air after you turn off the range. This will help
keep the whole kitchen cleaner and fresher.
Operate the hood as follows:
BCS3
NCS3 SERIES
AND
BLOWER SWITCH
I
Turns blower on to LOW speed.
Turns blower OFF.
II
Turns blower on to HIGH speed.
BCSM SERIES
ON/OFF BLOWER PUSH BUTTON
When blower is OFF, push on this button to turn ON the blower at the last selected speed. Push on
this button again to turn OFF the blower.
NOTE: If there is no speed selected (all blower speed push buttons up), the blower will not turn ON.
In that case, press on the desired speed level push button to activate the blower.
When blower is ON, change the blower speed by pressing on the push button corresponding to the
desired speed: one line for LOW, two lines for MEDIUM and three lines for HIGH speed.
ON/OFF LIGHT PUSH BUTTON
When lights are OFF, push once on this button to turn ON the lights at the last selected setting.
Push on this button again to turn OFF the lights.
LIGHT INTENSITY LEVELS PUSH BUTTON
Push on this button to change the light intensity (HIGH or LOW).
BLOWER SPEED LEVEL PUSH BUTTONS
LIGHT SWITCH
I
Turns light on to LOW intensity.
Turns light OFF.
II
Turns light on to HIGH intensity.
5

Publicité

loading