Astralpool VICTORIA Plus Silent VS Guide Rapide De Mise En Marche page 3

If the pump has to be mounted on the ground. __
ANCHOR DETAIL
Anchor detail
Self-priming of the pump once connected to the
hydraulic circuit. Fill the pre lter with water. ___
Self-priming
Connect the pump's cable
to the power line. Fit a
residual current device
(RCD) and a motor circuit
breaker in the circuit.
Add the lter that is
included with the pump.
QUICK GUIDE AND START-UP OF THE VICTORIA PLUS SILENT VS
HYDRAULIC INSTALLATION.
Pump
WIRING
PE
L
N
STOP START
- ASTRALPOOL
Fitting the seals on the pump's outlets. __________
CORRECT
Joint
Seal
Pipe tting
Closing the pre lter cover. ___________________
Pre lter cover unit
Pre lter cover
Seal housing to be
cleaned
LOAD
FILTER
LINE
INCORRECT
Joint
Seal
Pipe tting
O-ring seal
Pre lter
Basket
230 V - 50 Hz
30 mA RCD
Motor circuit breaker adjusted
to + 15% current marked in the
pump namplate.
3