Bergstrom SLIMFIT RENAULT T High Sleeper Cab 24 V Instructions De Montage page 24

SLIMFIT
EN
Check that the mounts are properly
14
supported in the front and back and that there
is no wiring which can be crushed. Tighten
the M8 nuts until the mounts come up against
the base hexagons.
14
Hexagon L=22 (M8)
Upholstery
Fastening mount
Position the console on the interior air
15
distribution panel and secure with (4)
6/100x10 Phillips head screws and (4) Ø6
wide-rimmed flat washers on hexagons.
Hexagon L=18
14
Hexagon L=17 (M8)
Interior air
distribution panel
24
30x25 EPDM Seal
Cabin roof
Hexagon L=24 M6