Bergstrom SLIMFIT RENAULT T High Sleeper Cab 24 V Instructions De Montage page 21

SLIMFIT
8 Assemble the aligners on the base with (4)
4x16 screws (200TX40016), respecting the
indicated position, with tightening torque
4.75x10% Nm.
4x16 torx screw
Position the unit on the hatch gap, introducing
9
the guides in the boreholes (always with
authorisation from the client) of the cabin.
Caution: If the unit is stuck in the spoiler,
release it by marking and making a cut.
9
9
8
15
9
Front part of unit
9
21
8
4x16 torx screw
15
9
EN