Nolangroup N-Com ESS III Mode D'emploi page 19

4. FUNCTIONS
Note: Before using the N-Com device for the first time, recharge the battery completely for at least 10
hours. To obtain best performances from the battery, it is recommended to completely recharge the
battery the first few times. Afterwards, you can recharge the battery for shorter periods. Whenever
possible, it is best to recharge the battery completely.
The ESS system features a menu with 3 operating modes: EMERGENCY STOP SIGNAL, REAL LIGHT,
POOR VISIBILITY LIGHT.
To scroll through this menu, briefly press the function key. Every time you press the key, the system
switches to the next mode.
N.B.: It is recommended to turn off the ESS III system on the rider helmet in case of a passenger.
Press the Function key for about 3 seconds, until
Switching on the LED turns on. Every time it is turned on, the
system positions itself in mode 1.
Press the Function key for about 3 seconds.
Switching off
Switch off is confirmed by the LED flashing 4 times.
7