Publicité
Les langues disponibles
Les langues disponibles
OPERATING INSTRUCTIONS
To reduce the risk of electric shock, this appliance has a polarized plug (one blade
is wider than the other). This plug will fit in a polarized outlet only one way. If the
plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a
qualified electrician to install the proper outlet. Do not change the plug in any way.
Before starting clipper, remove blade guard (some models may not have a blade
guard).
Plug cord into electrical outlet, operate at 120 volt,
60 cycle AC electrical current or as noted on the unit.
To start clipper, move switch button by pressing
down on the lock mechanism and moving to the #1
position. to stop, press down on the lock mechanism
and move switch button back to original position.
After using your clipper, rewrap cord and store in a
safe place.
USING ATTACHMENT COMBS
(Some models do not have combs and sizes will vary by kit)
You can set the blades for a longer cut by using any of the attachment combs made
for your Andis clipper. The combs mount easily; simply slip the cutter blade teeth
into comb and snap the comb down. To remove, simply snap off (Figures A & B).
Description
Standard Andis Blade
1/8" Blade Attachment
1/4" Blade Attachment
3/8" Blade Attachment
1/2" Blade Attachment
4
CLIPPING GUIDE
Clipping Direction
With hair grain
Against hair grain
With hair grain
Against hair grain
With hair grain
Against hair grain
With hair grain
Against hair grain
With hair grain
Against hair grain
Lock
Mechanism
Approx. Length of Cut
Fine
1/16"
-
1/32"
-
1/4"
-
1/8"
-
3/8"
-
1/4"
-
1/2"
-
3/8"
-
5/8"
-
1/2"
-
1
0
Coarse
3/16"
1/8"
3/8"
1/4"
1/2"
3/8"
5/8"
1/2"
7/8"
5/8"
Publicité
