Publicité
Factory Defaults
Binding
ON
Bind socket
Insert the Bind Plug in the
Connect a fully charged battery
Power on the ESC. The red
BIND port on the receiver.
pack to the ESC.
LED flashes, indicating the
receiver is in bind mode.
Center the ST TRIM and TH
Power the transmitter on.
The receiver LED will stop
TRIM dials on the transmitter.
flashing.
OFF
Remove the Bind Plug, then
Power off the transmitter.
power off the ESC to save the
settings.
WWW.ARRMA-RC.COM
18
Publicité
