Elba N55 204 Série Mode D'emploi page 20

GLASS LID (only for models with
glass lid)
For cleaning purposes, the lid can be ea-
sily removed upwards once taken to the
upright position.
Should the hinges slip off, replace them in
their housing being careful that:
• The right housing must receive the
hinge marked "D" while the left hou-
sing must receive the hinge marked
"S" (Fig. 5.3)
REGULATING OF THE BALANCE
Lower the lid and check the correct balan-
ce.
While opened at 45° it should hang up.
If necessary, register the calibration of the
hinge springs using the screws "R" (fig.
5.3).
R
S
Fig. 5.3
20
OVEN DOOR (Only for models N55 ..
220, N55 .. 320, N55 .. 322)
The internal glass of the oven door can be
easily removed for cleaning by unscrewing
the two fixing screws (fig. 5.4).
Do not shut lid when
Do not lower the glass lid when the
gas burner or electrical plates are
still hot or when the oven is
working or still hot.
Do not lay on the glass lid hot pans
and heavy kitchen utensils.
D
Dry off any liquid whitch may have
spilt on the cover before opening it.
Models with glass lid
burner alight.
ATTENTION
Fig. 5.4