Bosch Intuvia 100 Manuel Du Propriétaire page 14

English – 12
Displays and settings of the on-board computer
Speed and distance indicators
The speedometer always displays the current speed.
You can choose from the following functions in the
function display (combination of text indicator and
value indicator):
– <Distance>: Distance traveled since the last reset
– <Riding time>: Journey time since the last reset
– <Time>: Current time
– <Range>: Estimated range of the available eBike
battery charge (at constant conditions such as as-
sistance level, route profile, etc.)
– <Avg. Speed>: Average speed achieved since the
last reset
– <Max. Speed>: Maximum speed achieved since
the last reset
– <Total distance>: Total distance traveled with the
eBike (cannot be reset)
Note: The on-board computer automatically displays
a gear change recommendation when riding the
eBike. The display of the gear change recommenda-
tion is superimposed over the text display (f) of the
on-board computer, and can be deactivated manually
via the basic settings.
Switching to the function display
Press the or button until the required
function is displayed.
Press the select button until the re-
quired function is displayed.
Certain settings cannot be assumed on the on-board
computer, but only in the eBike Flow app, e.g.:
– <Wheel circum.>
– <Range reset>
– <Auto trip reset>
In addition, you receive an overview of the operating
hours and the installed components in the eBike
Flow app.
0 275 U07 3BI | (03.03.2023)
Displaying/Adjusting Basic Settings
Note: The settings menu cannot be called up while
riding.
To get to the basic settings menu, press the select
button on the operating unit until <Settings> ap-
pears in the text display.
Switching/Leaving Basic Settings
Press the or button until the required
basic setting is displayed.
Press the select button until the re-
quired basic setting is displayed.
Note: The changed setting is automatically saved
upon leaving the respective basic setting.
Changing Basic Settings
To scroll down, briefly press the select
button until the required value is dis-
played.
To scroll down, press the select but-
ton > 1 s until the required value is dis-
played.
Note: Pressing and holding the relevant button
switches automatically to the next value in the basic
settings.
You can choose between the following basic settings:
– <Language>: You can select your preferred system
language here.
– <Units>: Displaying the speed and distance in ei-
ther kilometers or miles.
– <Time>: You can set the time here.
– <Time format>: Displaying the time in 12-hour or
24-hour format.
– <Shift recom.>: You can choose whether or not to
have a prompt displayed when it is recommended
that you change gears.
– <Backlight>: You can set the duration of the back-
ground lighting here.
– <Brightness>: The brightness can be adjusted in
steps of 5 % from 5 to 100 %.
Bosch eBike Systems