EDM Product 33821 Manuel D'instructions page 22

INSTALLING THE CANOPY
2. Carefully push the cover to the bottom of the mounting
ES
bracket, drill two sliding holes aligned with the two prominent
screws in the mounting bracket, and then turn it clockwise
until it is tight.
3. Push the cover ring towards the bottom of the cover, slide
PT
the inner holes aligned with the two prominent screws back
into the mounting bracket and turn the cover ring clockwise
until it is tight.
EN
FR
ASSEMBLY: ATTACHMENT OF THE FAN BLADES
▶Installation of the fan blades: total 3 blades + 6 screws.
ASSEMBLY - FITTING THE LIGHTS
▶Installation of the lighting kit: 3 screws in total.
▶Connect the fan and light kit cables.
Instruction manual
MOUNTING - FIXING THE LIGHTS
INSTALL LAMP COVER
Installation effect completed..
REMOTE CONTROL WIRING DIAGRAM
WARNING: Turn off electrical power during installation and wiring
connection.
1. Connect the wire from the ceiling fan to the receiver.
2. Connect the wire from the receiver to the house wiring.
From CEILIN FAN
Receiver
Ref. 33821
From HOUSE
Brown
Blue
Grounding cable
Grounding cable
Antenna wire
Grounding cable
YELLOW/GREEN