PULOX PO-300 Mode D'emploi page 94

Immunity
test
Electrostatic
discharge
(ESD)
IEC 61000-4-
2
Power
frequency
(50Hz)
magnetic
field
IEC 61000-4-
8
Guidance and manufacture's declaration – electromagnetic immunity –
for EQUIPMENT and SYSTEMS that are not LIFE-SUPPORTING
Guidance and manufacture's declaration – electromagnetic immunity
The CMS50E Pulse Oximeter is intended for use in the electromagnetic
environment specified below. The customer or the user of CMS50E Pulse
Oximeter should assure that it is used in such an environment.
Immunity IEC 60601 test
test level
IEC
60601 Compliance
test level
level
8 kV 8 kV
contact contact
15 kV 15 kV air
air
30A/m 30A/m
Compliance
level
Electromagnetic
environment - guidance
Floors should be wood,
concrete or ceramic tile. If
floor are covered with
synthetic material, the
relative humidity should
be at least 30%. the
manufacturer may
recommend the ESD
precautionary procedures
to user.
Power frequency
magnetic fields should be
at levels characteristic of a
typical location in a typical
commercial or hospital
environment.
Electromagnetic
environment - guidance