Menu Operation - PULOX PO-300 Mode D'emploi

B. Under the measurement interface, turn on the sound prompt, when the
sound prompt occurs, short press the button to pause the sound
prompt, and it will resume automatically after about 60s.
C. If you want to turn off the sound prompt permanently, please set it in
menu.

6.1.3 Menu operation

Under the measurement interface, long press the button to enter the main
menu interface as shown in Figure 7, sound, record, clock, Bluetooth, etc.
can be set, methods are as followings:
Fig. 7 Main menu
A. Sound prompt setting
Under main menu, short press the button to select "Sound", then long press
the button to enter its setting interface shown in Figure 8.
Short press the button to select the option to be adjusted, then long press
the button to change the value.
"Direction": direction, "up": increase the value, "down": decrease the value
"SpO2 ALM HI": upper limit prompt for SpO2 over-limit
"SpO2 ALM LO": lower limit prompt for SpO2 over-limit
"PR ALM HI": upper limit prompt for PR over-limit
"PR ALM LO": lower limit prompt for PR over-limit
"Alarm": prompt for over-limit, "off": close, "on": open.
"Pulse Sound": PR sound, "off": close, "on": open.
Lower limit can not exceed the upper limit, and the upper limit can not be
lower than the lower limit when adjusting the values. SpO2 range: 0 % ~ 100
%, PR range: 0 ~ 254 bpm
Fig. 8 Sound prompt menu
Fig. 9 Record menu
EN