72'' ATLANTA Installation Instructions
11. Carefully insert the Remote Receiver above the hanger ball in the remainder spacing in the mounting
bracket. Take care not to damage or loosen any of the wiring. (Fig. 13)
INSTALLATION OF THE CANOPY (Fig. 14)
•
Loosen the 2 screws at the bottom of the mouthing bracket.
•
Slide the canopy up to the mounting bracket and align the key holes on the canopy with the screws on the
mounting bracket. Turn the canopy until it locks into place with the narrow section of the key holes and
secure it by tightening the two screws. Avoid damaging the electrical wiring prepared previously.
•
Slide the canopy cover ring up to the canopy and click in to cover the canopy cover screws.
NSTALLATION OF THE REMOTE CONTROL HOLDER (Fig. 15)
I
Install the holder (A) to the wall with two screws provided (B), hang up the remote by the holder.
7 | P a g e
FINISHING THE INSTALLATION
Fig. 13
Fig. 14
Fig. 15