LUCCI Air ATLANTA Manuel D'installation page 6

72'' ATLANTA Installation Instructions
INSTALLATION OF Non-Light decoration plate (Fig. 10 )
If no lamp is required, install Non-Light decoration plate
• Remove the lamp (6) from the GX53 lamp holder. Fig.10a
• Install the Non-Light decoration plate (7) on the light lit bracket. Fig.10b
ELECTRICAL WIRING DIAGRAM THE
Complete the electrical wiring according to the 'ELECTRICAL WIRING DIAGRAM' section below. (Fig.11)
⚫
Noted: The 72" ATLANTA fan is a DC technology fan and cannot be used with an AC wall switch. If use
wall switch, on/off toggle wall switch – only, Always leave in the "on" position and use remote.
5 | P a g e
Fig. 9b
Fig. 10a
Fig.10b
(6)
(7)