Publicité
Les langues disponibles
Les langues disponibles
ENGLISH
DELAY (TIME
or TIME
If you want the appliance to not start working immediately you can use this button to set the delay
time.
You must decide how long it will be before your bread is ready by pressing the "TIME
". Please note the delay time should include the baking time of program. That is, at the completion
the delay time, the bread will be hot and ready to be served. First, the program and degree of
browning must be selected, then, pressing "TIME
delay time in increments of 10 minutes. The maximum delay is 13 hours.
Example: Now it is 8:30p.m,if you would like your bread to be ready the next morning at 7 o'clock, i.e.
in 10 hours and 30 minutes. Select your menu, color, and loaf size, and then press the TIME
TIME
to add the time until 10:30 appears on the LCD. Then press the STOP/START button to
activate this delay program. You can see the dot flashed and the LCD will begin to count down to show
the remaining time. You will have fresh bread at 7:00 in the morning. If you don't want to take out the
bread immediately, the bread maker will keep it warm for 1 hour.
Note: For time delayed baking, do not use any easily perishable ingredients such as eggs,
fresh milk, fruits, onions, etc.
KEEP WARM:
Bread can be automatically kept warm for 60 minutes after baking. If you would like to take the bread
out, switch the program off with the START/STOP button.
MEMORY:
If the power supply has been cut off during the course of bread making, the process of bread making
will be continued automatically within 15 minutes, even without pressing Start/stop button. If the break
time exceeds 15 minutes the memory cannot be kept and the bread maker must be restarted，But if
the dough is no further than the kneading phase when the power supply is cut off, you can press the
"START/STOP" to continue the program from the beginning .
ENVIRONMENT:
The machine may work well in a wide range of temperatures, but there could be a difference in loaf
size between a very warm room and a very cold room. We suggest the room temperature should be
between 15 ℃ and 34℃.
WARNING DISPLAY:
1. If the display shows "H:HH" after the program has been started, (see Figure 1 below) the
temperature inside is still too high. Then the program has to be stopped. Open the lid and let the
machine cool down for 10 to 20 minutes.
2. If the display shows "E:EE" after you have pressed "START/STOP", (see Figure 2 below) the
temperature sensor is disconnected, and should be checked by an Authorized Service dealer
before being used again.
Figure 1
All manuals and user guides at all-guides.com
):
" or "TIME
" to increase or decrease the
Figure 2
"or "TIME
or
Publicité
