Publicité
Les langues disponibles
Les langues disponibles
Display window and button description
1. LED window shows the following functions:
Time / speed / distance / calorie /pulse window: 5 seconds to
switch display time, speed, heart rate distance and calorie data.
Time display range: 0:00-99:59
Speed display range: 0.6-7.5 mph
Distance display range: 0.00-99.99
Calorie display range: 0.00-999.9
Heart Rate display range: 50-200
2.Electronic watch function button: 3 mph, speed +, speed -,
stop, start, program, mode.
A. 3 mph: After starting up, press this speed direct selection
button directly at any speed, then the running speed of the
running belt is adjusted to 3mph.
B. SPEED+: During the exercise, the button will increase the
speed.
C. SPEED-: During the exercise, the button will slow down the
speed.
D. Stop: press this button in the running state, the treadmill
decelerates to stop.
E. Start: Press this button in the stop state, it will start the
running belt.
F. Program key: In the stop state, press the program key to cycle
through the program:
manual mode->P01->P02->P03->P04->P05->P06->...P11->P12.
20
G. Mode key: When manual mode is selected, the initial value
displayed in the speed window is 0.0, and the mode key can be
cycled to select the countdown mode: Window displays
30:00->Countdown distance mode: window displays
1.0->Countdown Calorie mode: window shows 50->Normal mode.
Startup instructions
1. Place the security lock on the panel, turn on the power switch,
and the buzzer will sound. Then enter the manual normal mode.
2. Press the start button, the time window displays 3 seconds
countdown, and each time the buzzer is sounded, the motor is
started.
3. The starting speed is: 0.6 mph. At this time, you can press the
speed +, - keys to adjust the speed and the 3 mph speed direct
selection button.
4. Run in normal mode, time is running at regular timing, speed is
fixed, can be adjusted manually.
5. Heart rate test, hold the light hand grip with both hands, and
have a heart rate displayed in heart rate window after a few
seconds. (Heart rate data is for reference only and cannot be used
for any medical-related purposes)
Safety lock function
In any state, the safety lock is pulled off, the window displays "E07",
and the buzzer BI-BI-BI rings three times. If the motor is running,
the motor is stopped urgently. When the safety lock is off, it cannot
be started.
Power saving mode
The system has a power-saving function. If there is no key
command input within 10 minutes in the standby state, the system
enters the power-saving mode, automatically turns off the display,
and presses any key to wake up the system again.
21
Publicité
