TXED BIKE 4000RM LS Mode D'emploi Et D'entretien page 33

•
Wheels run true and hub bearings are correctly adjusted
•
Wheels are properly secured and locked to frame/fork
•
Tyres are in good condition and inflated to correct pressure
•
Pedals are securely tightened to pedal cranks
•
Gears are correctly adjusted
•
All reflectors are in position
WARNING WHEELS: Every six months, your pedal electric assistance bicycle should be professionally
checked to ensure that it is in correct and safe working order. It is the responsibility of the rider to
ensure all parts are in working order prior to riding. It is very important to check the rim wear
monthly and monitor the rim wear line, if these grooves become invisible, the rim is past its safe
working life. A severely worn rim is very dangerous and must be replaced. Adjust the brake shoes
accordingly to make the clearance at 1-1.5mm from the track of rim.
REGULAR ATTENTION MUST BE PAID TO THE HUB MOTOR SPOKE TENSION.
Warning: You are warned that you assume the risk for personal injury, damage or losses if you
breach the above conditions and, the warranty will be void automatically.
Ⅱ. Name of components E-bike mod. 4000RM 26" LS
(Fig. 1)
33/72