Publicité
Les langues disponibles
Les langues disponibles
A foam tape is provided to seal the cooktop edges
to the countertop. Apply tape approximately 1/16"
(1.5 mm) from the glass edge to the underside of
the cooktop glass. Use tape around the entire
glass perimeter. Cut off excess where tape ends
butt.
Remove the two screws from burner box, then
place the baffle as showed below fixing it by the
screws removed previously.
Insert the cooktop centered into the cutout
opening.
Make sure the front edge of the counter top is
parallel to the cooktop. Make final check that all
required clearances are met.
All manuals and user guides at all-guides.com
7
Four clamp brackets are provided to clamp the
cooktop to the countertop. Tighten screws just
enough to hold brackets in place when cooktop is
put into cutout. Tighten screws securely.
Publicité
