Oregon Scientific BAR623P Mode D'emploi page 7

GETTING STARTED
BATTERIES
Batteries are supplied with this product:
Main unit
Remote unit
Insert batteries before first use, matching the polarity
(+ and -) as shown in the battery compartment. For best
results, install batteries in the remote sensor before the
main unit. Press RESET after each battery change.
NOTE Do not use rechargeable batteries.
shows when batteries are low.
NOTE It is recommended that you use alkaline batteries
with this product for longer performance.
P/N:086L003564-068 REV1
7/146
BAR623P_EN_R4.p65
All manuals and user guides at all-guides.com
3 x UM-3 (AA) 1.5V batteries
2 x UM-4 (AAA) 1.5V batteries
6
Installing the batteries:
UNIT
Main
Remote
6
8/7/04, 2:28 PM
LOCATION
Indoor Temperature Area
Outdoor Temperature Area