USBOPERATION
The unit contains a USB interface. The USB interface is located on the faceplate
beneath the protective cover. You can connect an USB memory device using this
interface.
1. Locate the USB Input Cover on the faceplate.
2. Lift the USB Input Cover to reveal the USB connector.
3. Insert the USB device into the USB connector. The unit will read the audio files
on the USB device automatically. "USB PLAY" will appear on the display panel.
4. If the unit is in another mode of operation press the SRC button on the
faceplate or the MODE button on the remote control to select USB mode.
Note: When in USB play mode, be sure not to remove the USB device from the USB
connector.
Note: The unit can only support a standard USB memory device. When connecting
an MP3 player that uses normal batteries (non rechargeable batteries), the
batteries should be removed from the MP3 player first and then connected to
the USB connector. Otherwise, damage to the batteries may result.
Note: This unit supports a USB device with up to 8GB storage size. If there is any
compatibility problems, we recommend you to format your USB device in
FAT32 mode before using it. If the problem persists, consult your dealer for
assistance.
MP3/WMAPlayback
To play MP3/WMA files from a USB flash memory, insert a USB flash memory into
the USB connector on the left side of the unit. The unit will start playing MP3/
WMA files on the USB flash memory automatically.
If the MP3/WMA files are stored in folders on the USB drive, the unit will start by
playing the first song in the first folder. After playing all the files sequentially in the
first folder, the unit will play sequentially all of the files in the next folder. The unit
will continue playing through all of the folders on the USB drive in this manner.
If the USB drive has loose files and folders containing files, it will play the loose
files sequentially, then it will play the files in the folders sequentially.
All manuals and user guides at all-guides.com
USB Input Cover
MP1516
33