little click. If you can see the red indicator on the upper
side of the button, it is not locked completely.
CAUTION:
• Always install the battery cartridge fully until the red
indicator cannot be seen. If not, it may accidentally fall
out of the tool, causing injury to you or someone
around you.
• Do not install the battery cartridge forcibly. If the
cartridge does not slide in easily, it is not being inserted
correctly.
Indicating the remaining battery capacity
(Fig. 2)
(Only for battery cartridges with the indicator)
Press the check button on the battery cartridge to indicate
the remaining battery capacity. The indicator lamps light
up for few seconds.
Indicator lamps
Lighted
Off
NOTE:
• Depending on the conditions of use and the ambient
temperature, the indication may differ slightly from the
actual capacity.
Overdischarge protection
When the battery capacity is not enough, the light goes off
automatically. In this case, remove the battery from the
tool and charge the battery.
Lighting up the LED light (Fig. 3)
CAUTION:
• Do not look in the LED light or see the source of light
directly.
Push the switch to light up the LED light. To turn off, push
the switch again.
Head angle (Fig. 4)
The head angle can be adjusted in 12 stages. Adjust as
desired.
CAUTION:
• Take care not to trap finger(s) when adjusting the head
angle. Trapping finger(s) may cause injury.
Zoom function (Fig. 5)
You can zoom the light by turning the zoom ring. Turn the
zoom ring to
side for widening, and to side for
narrowing.
NOTE:
• Do not turn the lens guard, or it comes off.
6
All manuals and user guides at all-guides.com
Remaining capacity
75% to 100%
50% to 75%
25% to 50%
0% to 25%
Strap hook (Fig. 6, 7)
The strap hook is convenient for temporarily hanging the
tool.
The strap hook can be installed on the upper or lower ring
in accordance with usage.
Magnet Attachment (optional accessory)
(Fig. 8, 9)
Attach the magnet attachment by tightening the screw.
When attaching the tool with the magnet attachment, use
a string to fix the magnet attachment.
WARNING:
• Do not bring the magnet attachment closer to precision
equipment such as electronic device, clock, watch, or
IC card. The magnetic force may affect them.
• Do not use the magnet attachment near the heart
pacemaker. There is a risk of malfunction.
• Before the attachment, make sure that the magnet can
be attached to the desired metal, and there is enough
space for the attachment. After the attachment, make
sure that the tool is firmly fixed.
NOTICE:
• If the magnet attachment is attached to the material for
a long period, the surface of the material may be
damaged depending on the use conditions.
• When detaching the magnet attachment, do not slide it.
The surface to which the magnet attachment is
attached may be damaged.
MAINTENANCE
CAUTION:
• Never use gasoline, benzine, thinner, alcohol or the
like. Discoloration, deformation or cracks may result.
To maintain product SAFETY and RELIABILITY, repairs,
any other maintenance or adjustment should be
performed by Makita Authorized Service Centers, always
using Makita replacement parts.
OPTIONAL ACCESSORIES
CAUTION:
These accessories or attachments are recommended for
use with your Makita tool specified in this manual. The
use of any other accessories or attachments might
present a risk of injury to persons. The accessories or
attachments should be used only in the proper and
intended manner.
• Magnet attachment
• Makita genuine battery and charger
NOTE:
Some items in the list may be included in the tool package
as standard accessories. They may differ from country to
country.