Publicité
• To configure Trigger Setup settings
1. While the Advanced Setup menu (page
• This displays the Trigger Setup screen with the
"Source" line highlighted.
• The function menu items that appears in the menu
bar depend on the sampling mode selected with
Sample Setup (page
the function menu when "Normal" is selected as the
sample sampling mode.
2. Use the function keys to select the trigger source you want.
• The following shows the trigger sources that can be selected for each sampling mode.
Sampling Mode
Real-time
Fast
Normal
Sound
• The trigger source is always "[EXE] key" when the sampling mode is "Extended", and
"CH1" when the sampling mode is "Clock" or "Period".
3. Perform one of the following operations, in accordance with the trigger source that was
selected in step 2.
If this is the
trigger source:
[EXE] key
Count Down
CH1
SONIC
Mic
[START] key
ε
-14
Using Advanced Setup
ε
-8) is on the display, press d(Trigger).
ε
-11). The nearby screen shows
1(EXE) : [EXE] key, 2(Cont) : Count Down
1(EXE) : [EXE] key, 2(Cont) : Count Down, 3(CH1), 5(Mic)
1(EXE) : [EXE] key, 2(Cont) : Count Down, 3(CH1),
4(Sonic), 5(START) : [START] key
1(EXE) : [EXE] key, 2(Cont) : Count Down, 5(Mic)
Do this next:
Press w to finalize Trigger Setup and return to the Advanced
Setup menu.
Specify the countdown start time. See "To specify the countdown
start time" below.
Specify the trigger threshold value and trigger edge direction. See
"To specify the trigger threshold value and trigger edge type" on
ε
page
-15, "To configure trigger threshold, trigger start edge, and
trigger end edge settings" or "To configure Photogate trigger start
and end settings" on page
Specify the trigger threshold value and motion sensor level. See
"To specify the trigger threshold value and motion sensor level" on
ε
page
-17.
Specify microphone sensitivity. See "To specify microphone
ε
sensitivity" on page
-15.
Press w to finalize Trigger Setup and return to the Advanced
Setup menu.
Trigger Source
ε
-16.
Publicité
