Publicité
3. Using Advanced Setup
Advanced Setup provides you with total control over a number of parameters that you can
adjust to configure the Data Logger setup that suits your particular needs.
k Advanced Setup Operations
• To configure a Data Logger setup using Advanced Setup
The following procedure describes the general steps for using Advanced Setup. Refer to the
pages as noted for more information.
1. Display the E-CON3 main menu (page
2. Press 1(SET). This displays the "Setup Data Logger" submenu.
3. Press 2(ADVANCE). This displays the Advanced Setup menu.
4. If you want to configure a custom probe at this point, press f(Custom Probe). Next,
follow the steps under "To configure a custom probe setup" on page
• You can also configure a custom probe during the procedure under "To configure
Channel Setup settings" on page
• Custom probe configurations you have stored in memory can be selected using
Channel in step 5, below.
5. Use the Advanced Setup keys described below to set other parameters.
• b(Channel) ...... Displays a screen that shows the sensors that are currently
• c(Sample) ....... Displays a screen for selecting the sampling mode, and for
• d(Trigger) ........ Displays a screen for configuring sampling start (trigger)
• e(Graph) ......... Displays a screen for configuring graph settings. See "Graph
• You can return the settings on the above setup screens (b through e) using the
procedure described under "To return setup parameters to their initial defaults" below.
ε
-8
Using Advanced Setup
ε
-1).
ε
-9.
assigned to each channel (CH1, CH2, CH3, SONIC, Mic). You can
also use this dialog to change sensor assignments. See "Channel
ε
Setup" on page
-9 for more information.
specifying the sampling interval, the number of samples, and the
warm-up mode. When "Fast" is selected for "Mode", this dialog box
also displays a setting for turning FFT (frequency characteristics)
graphing on and off. See "Sample Setup" on page
information.
conditions. See "Trigger Setup" on page
ε
Setup" on page
-17 for more information.
Advanced Setup Menu
ε
-19.
ε
-11 for more
ε
-13 for more information.
Publicité
