Publicité
3. What you need to do next depends on the currently selected channel.
• CH1, CH2, or CH3
Press a function key to display a menu of sensors that can be assigned to the selected
channel.
1(CASIO) ..............Displays a menu of CASIO sensors.
2(VERNIR) ...........Displays a menu of Vernier sensors.
3(CMA) .................Displays a menu of CMA sensors.
4(CUSTOM) .........Displays a menu of custom probes.
5(None) ................Press this key when you want leave the channel without any
• SONIC Channel (EA-200 only)
Press a function key to display a menu of sensors that can be assigned to this channel.
1(CASIO) ..............Displays a menu of CASIO sensors, but only "Motion" can be
2(VERNIR) ...........Displays a menu of Vernier sensors. You can select "Motion" or
Note
• On the menu that appears after you select "Motion" from either the CASIO or
Vernier sensor menu, select either "meters" or "feet" as the sampling unit.
• After selecting "Motion" from either the CASIO or Vernier sensor menu, you can
press the K key to toggle "smoothing (correction of measurement error)" on
("-Smooth" displayed) and off ("-Smooth" not displayed).
• From the menu that appears after you select "Photogate" as the sensor, select
[Gate] or [Pulley].
[Gate] ...............Select this option when using the Photogate sensor alone.
[Pulley] ............. Select this option when using the Photogate sensor along with a
5(None) ................Select this option to disable the SONIC channel.
• Mic Channel (EA-200 only)
For this channel, the sensor is automatically set to Built-in (External) Microphone.
However, you need to configure the settings described below.
1(Sound) ..............Select this option to record elapsed time and volume 2-
2(FFT) ..................Select this option to record frequency and volume 2-dimensional
5(None) ................Select this option to disable the Mic channel.
4. Repeat steps 2 and 3 as many times as necessary to configure all the channels you want.
5. After all the settings are the way you want, press w.
• This returns to the Advanced Setup menu.
ε
-10
Using Advanced Setup
sensor assigned to it.
selected.
"Photogate".
smart pulley.
dimensional sampled sound data (elapsed time on the horizontal
axis, volume on the vertical axis).
sampled sound data (frequency on the horizontal axis, volume on
the vertical axis).
Publicité
